PutBucketPolicy - Amazon Simple Storage Service

PutBucketPolicy

Applies an Amazon S3 bucket policy to an Amazon S3 bucket.

Note

Directory buckets - For directory buckets, you must make requests for this API operation to the Regional endpoint. These endpoints support path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide.

Permissions

If you are using an identity other than the root user of the AWS account that owns the bucket, the calling identity must both have the PutBucketPolicy permissions on the specified bucket and belong to the bucket owner's account in order to use this operation.

If you don't have PutBucketPolicy permissions, Amazon S3 returns a 403 Access Denied error. If you have the correct permissions, but you're not using an identity that belongs to the bucket owner's account, Amazon S3 returns a 405 Method Not Allowed error.

Important

To ensure that bucket owners don't inadvertently lock themselves out of their own buckets, the root principal in a bucket owner's AWS account can perform the GetBucketPolicy, PutBucketPolicy, and DeleteBucketPolicy API actions, even if their bucket policy explicitly denies the root principal's access. Bucket owner root principals can only be blocked from performing these API actions by VPC endpoint policies and AWS Organizations policies.

  • General purpose bucket permissions - The s3:PutBucketPolicy permission is required in a policy. For more information about general purpose buckets bucket policies, see Using Bucket Policies and User Policies in the Amazon S3 User Guide.

  • Directory bucket permissions - To grant access to this API operation, you must have the s3express:PutBucketPolicy permission in an IAM identity-based policy instead of a bucket policy. Cross-account access to this API operation isn't supported. This operation can only be performed by the AWS account that owns the resource. For more information about directory bucket policies and permissions, see AWS Identity and Access Management (IAM) for S3 Express One Zone in the Amazon S3 User Guide.

Example bucket policies

General purpose buckets example bucket policies - See Bucket policy examples in the Amazon S3 User Guide.

Directory bucket example bucket policies - See Example bucket policies for S3 Express One Zone in the Amazon S3 User Guide.

HTTP Host header syntax

Directory buckets - The HTTP Host header syntax is s3express-control.region.amazonaws.com.

The following operations are related to PutBucketPolicy:

Request Syntax

PUT /?policy HTTP/1.1 Host: Bucket.s3.amazonaws.com Content-MD5: ContentMD5 x-amz-sdk-checksum-algorithm: ChecksumAlgorithm x-amz-confirm-remove-self-bucket-access: ConfirmRemoveSelfBucketAccess x-amz-expected-bucket-owner: ExpectedBucketOwner { Policy in JSON format }

URI Request Parameters

The request uses the following URI parameters.

Bucket

The name of the bucket.

Directory buckets - When you use this operation with a directory bucket, you must use path-style requests in the format https://s3express-control.region_code.amazonaws.com/bucket-name . Virtual-hosted-style requests aren't supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must also follow the format bucket_base_name--az_id--x-s3 (for example, DOC-EXAMPLE-BUCKET--usw2-az1--x-s3). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide

Required: Yes

Content-MD5

The MD5 hash of the request body.

For requests made using the AWS Command Line Interface (CLI) or AWS SDKs, this field is calculated automatically.

Note

This functionality is not supported for directory buckets.

x-amz-confirm-remove-self-bucket-access

Set this parameter to true to confirm that you want to remove your permissions to change this bucket policy in the future.

Note

This functionality is not supported for directory buckets.

x-amz-expected-bucket-owner

The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).

Note

For directory buckets, this header is not supported in this API operation. If you specify this header, the request fails with the HTTP status code 501 Not Implemented.

x-amz-sdk-checksum-algorithm

Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum-algorithm or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request.

For the x-amz-checksum-algorithm header, replace algorithm with the supported algorithm from the following list:

  • CRC32

  • CRC32C

  • SHA1

  • SHA256

For more information, see Checking object integrity in the Amazon S3 User Guide.

If the individual checksum value you provide through x-amz-checksum-algorithm doesn't match the checksum algorithm you set through x-amz-sdk-checksum-algorithm, Amazon S3 ignores any provided ChecksumAlgorithm parameter and uses the checksum algorithm that matches the provided value in x-amz-checksum-algorithm .

Note

For directory buckets, when you use AWS SDKs, CRC32 is the default checksum algorithm that's used for performance.

Valid Values: CRC32 | CRC32C | SHA1 | SHA256

Request Body

The request accepts the following data in JSON format.

Response Syntax

HTTP/1.1 200

Response Elements

If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.

Examples

Sample Request for general purpose buckets

The following request shows the PUT individual policy request for the bucket.

PUT /?policy HTTP/1.1 Host: bucket.s3.<Region>.amazonaws.com Date: Tue, 04 Apr 2010 20:34:56 GMT Authorization: authorization string { "Version":"2008-10-17", "Id":"aaaa-bbbb-cccc-dddd", "Statement" : [ { "Effect":"Allow", "Sid":"1", "Principal" : { "AWS":["111122223333","444455556666"] }, "Action":["s3:*"], "Resource":"arn:aws:s3:::bucket/*" } ] }

Sample Response for general purpose buckets

This example illustrates one usage of PutBucketPolicy.

HTTP/1.1 204 No Content x-amz-id-2: Uuag1LuByR5Onimru9SAMPLEAtRPfTaOFg== x-amz-request-id: 656c76696e6727732SAMPLE7374 Date: Tue, 04 Apr 2010 20:34:56 GMT Connection: keep-alive Server: AmazonS3

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: